AN ANALYTICAL PROCEDURE FOR PREDICTING OPENING LOADS OF CRACKS AT NOTCHES

1460-2695

Blackwell Publishing Journal Backfiles 1879-2005

Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics

Abstract— An analytical procedure for the prediction of opening load levels for cracks growing from notches is presented, and estimates are made using experimental crack opening load data. The procedure is based on McClung's original procedure for estimating the local elastic-plastic stress—strain situation at the point of a hypothetical crack tip in a notched but uncracked body. A crack opening stress value for a crack in an urmotched body under the same stress—strain condition is then predicted. The corresponding opening load level for the crack stress-strain configuration in the notched but uncracked body is then predicted with a simple backward calculation. For the evaluation of the elastic-plastic stress distribution, simple analytical relationships, such as Neuber's rule, are used. Estimation of the crack opening stress level is performed using various crack opening stress formulae reported in the literature for cracks in unnotched specimens under a uniform stress distribution. The accuracy of all the investigated crack opening stress formulae within the scope of the presented procedure is checked, and discussed in detail using experimental data sets for opening load levels of comer cracks and through-thickness cracks in notched specimens of FeE460 and A15086. The predicted results using Newman's crack opening stress formulae, simply modified in respect to the definition of the flow stress, have been identified to be qualitatively and quantitatively consistent with the trends observed in experimental crack opening data.

Electronic Resource