Advanced Light Source elliptical wiggler : Proceedings of the 5th international conference on synchrotron radiation instrumentation
Hoyer, E. ; Akre, J. ; Humphries, D. ; Marks, S. ; Minamihara, Y. ; Pipersky, P. ; Plate, D. ; Schlueter, R.
[S.l.] : American Institute of Physics (AIP)
Published 1995
[S.l.] : American Institute of Physics (AIP)
Published 1995
| ISSN: |
1089-7623
|
|---|---|
| Source: |
AIP Digital Archive
|
| Topics: |
Physics
Electrical Engineering, Measurement and Control Technology
|
| Notes: |
A 3.5-m-long elliptical wiggler, optimized to produce elliptically polarized light in the 50 eV to 10 keV range, is currently under design and construction at the Advanced Light Source at Lawrence Berkeley Laboratory. Calculations of spectral performance show that the flux of circularly polarized photons exceeds 1013 photons/s over the 50 eV to 10 keV operating range for current of 0.4 A and 1.5 GeV electron energy. This device features vertical and horizontal magnetic structures of 14 and 141/2 periods, respectively. The period length is 20.0 cm. The vertical structure is a hybrid permanent magnet design with tapered pole tips that produce a peak field of 2.0 T. The horizontal structure is an iron core electromagnetic design, shifted longitudinally 1/4 period, that is tucked between the upper and lower vertical magnetic structure sections. A maximum peak oscillating field of 0.095 T at a frequency up to 1 Hz will be achieved by excitation of the horizontal poles with a trapezoidal current waveform. The vacuum chamber is an unconventional design that is removable from the magnetic structure, after magnetic measurements, for UHV processing. The chamber is fabricated from non-magnetic stainless steel to minimize the effects of eddy currents. Device design is presented. © 1995 American Institute of Physics.
|
| Type of Medium: |
Electronic Resource
|
| URL: |