Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury

Halász, A. ; Polyák, K. ; Gegus, E.
Springer
Published 1981
ISSN:
1436-5073
Source:
Springer Online Journal Archives 1860-2000
Topics:
Chemistry and Pharmacology
Description / Table of Contents:
Zusammenfassung Das Verhalten verschiedener Quecksilber-Verbindungen im Graphitrohr bei der Bestimmung der Atomabsorption wurde untersucht. Bei wasserlöslichen, flüchtigen Quecksilberverbindungen (Nitrat, Chlorid) tritt schon bei dem Eintrocknen des Tropfens ein erheblicher Quecksilberverlust auf. Quecksilber kann aber in Form des kolloidalen Quecksilbersulfids bei ca. 200° C und Versprühung bei relativ niedriger Temperatur bestimmt werden. Einige Störungen begrenzen die Verwendbarkeit des Verfahrens in der Praxis (mit Quecksilber flüchtige Verbindungen, Anwesenheit anderer Metalle als Sulfide), aber die Verwendung von Quecksilber-Dithizonat beseitigt diese Störungen.
Notes:
Summary The atomic-absorption behaviour of different mercury compounds in the graphite tube was investigated. It was established that in the case of water-soluble volatile mercury compounds (nitrate, chloride) there is a considerable mercury loss even during the drying of the drop. The mercury can be determined, however, in the form of colloidal mercury sulphide atca. 200° C and with atomization at a relatively low temperature. Some interferences limit the use of the method in practice (compounds evaporating together with the mercury, presence of other metals producing sulphide precipitates) but the use of mercury dithizonate overcomes these limitations. The method was applied for determination of the mercury content of waste water and waste water sludge.
Type of Medium:
Electronic Resource
URL:
_version_ 1798296253310697473
autor Halász, A.
Polyák, K.
Gegus, E.
autorsonst Halász, A.
Polyák, K.
Gegus, E.
book_url http://dx.doi.org/10.1007/BF01196739
datenlieferant nat_lic_papers
hauptsatz hsatz_simple
identnr NLM207823863
issn 1436-5073
journal_name Microchimica acta
materialart 1
notes Summary The atomic-absorption behaviour of different mercury compounds in the graphite tube was investigated. It was established that in the case of water-soluble volatile mercury compounds (nitrate, chloride) there is a considerable mercury loss even during the drying of the drop. The mercury can be determined, however, in the form of colloidal mercury sulphide atca. 200° C and with atomization at a relatively low temperature. Some interferences limit the use of the method in practice (compounds evaporating together with the mercury, presence of other metals producing sulphide precipitates) but the use of mercury dithizonate overcomes these limitations. The method was applied for determination of the mercury content of waste water and waste water sludge.
package_name Springer
publikationsjahr_anzeige 1981
publikationsjahr_facette 1981
publikationsjahr_intervall 8019:1980-1984
publikationsjahr_sort 1981
publisher Springer
reference 76 (1981), S. 229-238
search_space articles
shingle_author_1 Halász, A.
Polyák, K.
Gegus, E.
shingle_author_2 Halász, A.
Polyák, K.
Gegus, E.
shingle_author_3 Halász, A.
Polyák, K.
Gegus, E.
shingle_author_4 Halász, A.
Polyák, K.
Gegus, E.
shingle_catch_all_1 Halász, A.
Polyák, K.
Gegus, E.
Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
Summary The atomic-absorption behaviour of different mercury compounds in the graphite tube was investigated. It was established that in the case of water-soluble volatile mercury compounds (nitrate, chloride) there is a considerable mercury loss even during the drying of the drop. The mercury can be determined, however, in the form of colloidal mercury sulphide atca. 200° C and with atomization at a relatively low temperature. Some interferences limit the use of the method in practice (compounds evaporating together with the mercury, presence of other metals producing sulphide precipitates) but the use of mercury dithizonate overcomes these limitations. The method was applied for determination of the mercury content of waste water and waste water sludge.
Zusammenfassung Das Verhalten verschiedener Quecksilber-Verbindungen im Graphitrohr bei der Bestimmung der Atomabsorption wurde untersucht. Bei wasserlöslichen, flüchtigen Quecksilberverbindungen (Nitrat, Chlorid) tritt schon bei dem Eintrocknen des Tropfens ein erheblicher Quecksilberverlust auf. Quecksilber kann aber in Form des kolloidalen Quecksilbersulfids bei ca. 200° C und Versprühung bei relativ niedriger Temperatur bestimmt werden. Einige Störungen begrenzen die Verwendbarkeit des Verfahrens in der Praxis (mit Quecksilber flüchtige Verbindungen, Anwesenheit anderer Metalle als Sulfide), aber die Verwendung von Quecksilber-Dithizonat beseitigt diese Störungen.
1436-5073
14365073
Springer
shingle_catch_all_2 Halász, A.
Polyák, K.
Gegus, E.
Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
Summary The atomic-absorption behaviour of different mercury compounds in the graphite tube was investigated. It was established that in the case of water-soluble volatile mercury compounds (nitrate, chloride) there is a considerable mercury loss even during the drying of the drop. The mercury can be determined, however, in the form of colloidal mercury sulphide atca. 200° C and with atomization at a relatively low temperature. Some interferences limit the use of the method in practice (compounds evaporating together with the mercury, presence of other metals producing sulphide precipitates) but the use of mercury dithizonate overcomes these limitations. The method was applied for determination of the mercury content of waste water and waste water sludge.
Zusammenfassung Das Verhalten verschiedener Quecksilber-Verbindungen im Graphitrohr bei der Bestimmung der Atomabsorption wurde untersucht. Bei wasserlöslichen, flüchtigen Quecksilberverbindungen (Nitrat, Chlorid) tritt schon bei dem Eintrocknen des Tropfens ein erheblicher Quecksilberverlust auf. Quecksilber kann aber in Form des kolloidalen Quecksilbersulfids bei ca. 200° C und Versprühung bei relativ niedriger Temperatur bestimmt werden. Einige Störungen begrenzen die Verwendbarkeit des Verfahrens in der Praxis (mit Quecksilber flüchtige Verbindungen, Anwesenheit anderer Metalle als Sulfide), aber die Verwendung von Quecksilber-Dithizonat beseitigt diese Störungen.
1436-5073
14365073
Springer
shingle_catch_all_3 Halász, A.
Polyák, K.
Gegus, E.
Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
Summary The atomic-absorption behaviour of different mercury compounds in the graphite tube was investigated. It was established that in the case of water-soluble volatile mercury compounds (nitrate, chloride) there is a considerable mercury loss even during the drying of the drop. The mercury can be determined, however, in the form of colloidal mercury sulphide atca. 200° C and with atomization at a relatively low temperature. Some interferences limit the use of the method in practice (compounds evaporating together with the mercury, presence of other metals producing sulphide precipitates) but the use of mercury dithizonate overcomes these limitations. The method was applied for determination of the mercury content of waste water and waste water sludge.
Zusammenfassung Das Verhalten verschiedener Quecksilber-Verbindungen im Graphitrohr bei der Bestimmung der Atomabsorption wurde untersucht. Bei wasserlöslichen, flüchtigen Quecksilberverbindungen (Nitrat, Chlorid) tritt schon bei dem Eintrocknen des Tropfens ein erheblicher Quecksilberverlust auf. Quecksilber kann aber in Form des kolloidalen Quecksilbersulfids bei ca. 200° C und Versprühung bei relativ niedriger Temperatur bestimmt werden. Einige Störungen begrenzen die Verwendbarkeit des Verfahrens in der Praxis (mit Quecksilber flüchtige Verbindungen, Anwesenheit anderer Metalle als Sulfide), aber die Verwendung von Quecksilber-Dithizonat beseitigt diese Störungen.
1436-5073
14365073
Springer
shingle_catch_all_4 Halász, A.
Polyák, K.
Gegus, E.
Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
Summary The atomic-absorption behaviour of different mercury compounds in the graphite tube was investigated. It was established that in the case of water-soluble volatile mercury compounds (nitrate, chloride) there is a considerable mercury loss even during the drying of the drop. The mercury can be determined, however, in the form of colloidal mercury sulphide atca. 200° C and with atomization at a relatively low temperature. Some interferences limit the use of the method in practice (compounds evaporating together with the mercury, presence of other metals producing sulphide precipitates) but the use of mercury dithizonate overcomes these limitations. The method was applied for determination of the mercury content of waste water and waste water sludge.
Zusammenfassung Das Verhalten verschiedener Quecksilber-Verbindungen im Graphitrohr bei der Bestimmung der Atomabsorption wurde untersucht. Bei wasserlöslichen, flüchtigen Quecksilberverbindungen (Nitrat, Chlorid) tritt schon bei dem Eintrocknen des Tropfens ein erheblicher Quecksilberverlust auf. Quecksilber kann aber in Form des kolloidalen Quecksilbersulfids bei ca. 200° C und Versprühung bei relativ niedriger Temperatur bestimmt werden. Einige Störungen begrenzen die Verwendbarkeit des Verfahrens in der Praxis (mit Quecksilber flüchtige Verbindungen, Anwesenheit anderer Metalle als Sulfide), aber die Verwendung von Quecksilber-Dithizonat beseitigt diese Störungen.
1436-5073
14365073
Springer
shingle_title_1 Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
shingle_title_2 Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
shingle_title_3 Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
shingle_title_4 Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
sigel_instance_filter dkfz
geomar
wilbert
ipn
albert
fhp
source_archive Springer Online Journal Archives 1860-2000
timestamp 2024-05-06T09:49:09.899Z
titel Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
titel_suche Processes taking place in the graphite tube: Anion and matrix effects in atomic absorption spectrometry. II. Determination of mercury
toc Zusammenfassung Das Verhalten verschiedener Quecksilber-Verbindungen im Graphitrohr bei der Bestimmung der Atomabsorption wurde untersucht. Bei wasserlöslichen, flüchtigen Quecksilberverbindungen (Nitrat, Chlorid) tritt schon bei dem Eintrocknen des Tropfens ein erheblicher Quecksilberverlust auf. Quecksilber kann aber in Form des kolloidalen Quecksilbersulfids bei ca. 200° C und Versprühung bei relativ niedriger Temperatur bestimmt werden. Einige Störungen begrenzen die Verwendbarkeit des Verfahrens in der Praxis (mit Quecksilber flüchtige Verbindungen, Anwesenheit anderer Metalle als Sulfide), aber die Verwendung von Quecksilber-Dithizonat beseitigt diese Störungen.
topic V
uid nat_lic_papers_NLM207823863