Fluid inclusion studies of the Felbertal scheelite deposit

ISSN:
1437-3262
Source:
Springer Online Journal Archives 1860-2000
Topics:
Geosciences
Description / Table of Contents:
Abstract Fluid inclusion measurements on quartz, scheelite, beryl, fluorite and calcite in the metamorphosed Felbertal scheelite deposit display two main types of fluid inclusions: 1. H2O-CO2 fluid inclusions are characterized by variable amounts of CO2 up to 18 wt.%. They show two or three phases at room temperature. The bulk homogenization temperatures for the inclusions range between +269 °C and +357 °C. The calculated salinities are between 2.2 and 7.8 wt.% NaCl equivalent. For the late CO2-bearing fluid inclusions a methane component is evident from microthermometrical data (Tmclath 〉10.0 °C combined with TmCO2〈−56.6 °C) and from Raman microprobe analyses. 2. Aqueous, two-phase fluid inclusions with salinities in the range between 0 and 11 wt.% NaCl equivalent. Their homogenization temperatures are scattered between 100 °C and 360 °C. Both types of fluid inclusions are of Alpine origin. They do not record the conditions of the original tungsten ore formation in pre-Alpine (Upper Proterozoic) time. However, it was possible to deduce a path for the fluid evolution and the combined ore redeposition during the retrograde Alpine metamorphism and tectonism from microthermometrical and petrographical studies.
Abstract:
Résumé Dans le gisement métamorphique de scheelite de Felbertal, les inclusions fluides, contenues dans le quartz, la scheelite, le béryl, la fluorine et la calcite, se répartissent en deux catégories: 1. Des inclusions aqueuses caractérisées par des teneurs en CO2, variables, pouvant atteindre 18% en poids. Elles comportent 2 à 3 phases à la température ordinaire. La température d'homogénisation va de 269 à 357 °C. Le calcul de la salinité donne entre 2,2 et 7,8% en poids d'équivalent NaCl. Dans les plus jeunes de ces inclusions à CO2, la présence de méthane est révélée par la microthermométrie (Tm clath〉10,0 °C avec Tm CO2〈−56,6 °C) et par la microsonde Raman. 2. Des inclusions aqueuses à 2 phases, dont la salinité est comprise entre 0 et 11% en poids d'équivalent NaCl. Leurs températures d'homogénisation se répartissent entre 100 et 360 °C. Les deux types d'inclusions sont d'origine alpine et ne correspondent donc pas aux conditions de la formation originelle du minerai, au Protérozoïque supérieur. Toutefois, les examens pétrographiques et microthermométriques ont permis de reconstituer le trajet d'évolution du fluide et les processus associés de remobilisation et reprécipitation du minerai au cours de la phase tectono-métamorphique rétrograde alpine.
Notes:
Zusammenfassung Zwei Haupttypen von Flüssigkeitseinschlüssen in Quarz, Scheelit, Beryll, Fluorit und Calcit aus der Scheelitlagerstätte Felbertal sind aufgrund mikrothermometrischer Messungen nachgewiesen: 1. Wässrige Flüssigkeitseinschlüsse mit variablen CO2-Ge-halten — maximal 18 Gew.-% CO2 — sind bei Raumtemperatur zwei- oder dreiphasig. Ihre Homogenisierungstemperaturen liegen zwischen 269 °C und 357 °C. Die errechneten Salzgehalte repräsentieren 2.2 bis 7.8 Gew.-% NaCl-Äquivalent. Eine zusätzliche Methan-Komponente ist in jungen CO2-führenden Flüssigkeitseinschlüssen durch die mikrothermometrischen Daten (Tmclath 〉10.0 °C bei gleichzeitig TmCO2〈−56.6 °C) und Raman-spektroskopischen Analysen nachweisbar. 2. Wässrige Flüssigkeitseinschlüsse ohne feststellbare CO2-Gehalte sind zweiphasig. Ihre Salinitäten schwanken zwischen 0 und 11 Gew.-% NaCl-Äquivalent. Die Homogenisierungstemperaturen streuen zwischen 100 °C und 360 °C. Beide Typen von Flüssigkeitseinschlüssen sind zeitlich und genetisch der alpidischen Regionalmetamorphose zuordenbar. Sie ermöglichen keine Rückschlüsse auf die ursprüngliche Wolframabscheidung im Rahmen eines Geothermalsystems mit Explosionsphänomenen in präalpidischer (oberproterozoischer) Zeit. Aus den mikrothermometrischen und petrographischen Befunden war es jedoch möglich, den Entwicklungspfad der Fluide und die damit verbundene Remobilisation und Wiederablagerung der Erzmineralisation während der alpidischen retrograden Metamorphose abzuleiten.
Type of Medium:
Electronic Resource
URL:
_version_ 1798296285199990784
abstract Résumé Dans le gisement métamorphique de scheelite de Felbertal, les inclusions fluides, contenues dans le quartz, la scheelite, le béryl, la fluorine et la calcite, se répartissent en deux catégories: 1. Des inclusions aqueuses caractérisées par des teneurs en CO2, variables, pouvant atteindre 18% en poids. Elles comportent 2 à 3 phases à la température ordinaire. La température d'homogénisation va de 269 à 357 °C. Le calcul de la salinité donne entre 2,2 et 7,8% en poids d'équivalent NaCl. Dans les plus jeunes de ces inclusions à CO2, la présence de méthane est révélée par la microthermométrie (Tm clath〉10,0 °C avec Tm CO2〈−56,6 °C) et par la microsonde Raman. 2. Des inclusions aqueuses à 2 phases, dont la salinité est comprise entre 0 et 11% en poids d'équivalent NaCl. Leurs températures d'homogénisation se répartissent entre 100 et 360 °C. Les deux types d'inclusions sont d'origine alpine et ne correspondent donc pas aux conditions de la formation originelle du minerai, au Protérozoïque supérieur. Toutefois, les examens pétrographiques et microthermométriques ont permis de reconstituer le trajet d'évolution du fluide et les processus associés de remobilisation et reprécipitation du minerai au cours de la phase tectono-métamorphique rétrograde alpine.
autor Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
autorsonst Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
book_url http://dx.doi.org/10.1007/BF01830638
datenlieferant nat_lic_papers
hauptsatz hsatz_simple
identnr NLM206068824
issn 1437-3262
journal_name International journal of earth sciences
materialart 1
notes Zusammenfassung Zwei Haupttypen von Flüssigkeitseinschlüssen in Quarz, Scheelit, Beryll, Fluorit und Calcit aus der Scheelitlagerstätte Felbertal sind aufgrund mikrothermometrischer Messungen nachgewiesen: 1. Wässrige Flüssigkeitseinschlüsse mit variablen CO2-Ge-halten — maximal 18 Gew.-% CO2 — sind bei Raumtemperatur zwei- oder dreiphasig. Ihre Homogenisierungstemperaturen liegen zwischen 269 °C und 357 °C. Die errechneten Salzgehalte repräsentieren 2.2 bis 7.8 Gew.-% NaCl-Äquivalent. Eine zusätzliche Methan-Komponente ist in jungen CO2-führenden Flüssigkeitseinschlüssen durch die mikrothermometrischen Daten (Tmclath 〉10.0 °C bei gleichzeitig TmCO2〈−56.6 °C) und Raman-spektroskopischen Analysen nachweisbar. 2. Wässrige Flüssigkeitseinschlüsse ohne feststellbare CO2-Gehalte sind zweiphasig. Ihre Salinitäten schwanken zwischen 0 und 11 Gew.-% NaCl-Äquivalent. Die Homogenisierungstemperaturen streuen zwischen 100 °C und 360 °C. Beide Typen von Flüssigkeitseinschlüssen sind zeitlich und genetisch der alpidischen Regionalmetamorphose zuordenbar. Sie ermöglichen keine Rückschlüsse auf die ursprüngliche Wolframabscheidung im Rahmen eines Geothermalsystems mit Explosionsphänomenen in präalpidischer (oberproterozoischer) Zeit. Aus den mikrothermometrischen und petrographischen Befunden war es jedoch möglich, den Entwicklungspfad der Fluide und die damit verbundene Remobilisation und Wiederablagerung der Erzmineralisation während der alpidischen retrograden Metamorphose abzuleiten.
package_name Springer
publikationsjahr_anzeige 1990
publikationsjahr_facette 1990
publikationsjahr_intervall 8009:1990-1994
publikationsjahr_sort 1990
publisher Springer
reference 79 (1990), S. 451-466
search_space articles
shingle_author_1 Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
shingle_author_2 Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
shingle_author_3 Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
shingle_author_4 Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
shingle_catch_all_1 Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
Fluid inclusion studies of the Felbertal scheelite deposit
Zusammenfassung Zwei Haupttypen von Flüssigkeitseinschlüssen in Quarz, Scheelit, Beryll, Fluorit und Calcit aus der Scheelitlagerstätte Felbertal sind aufgrund mikrothermometrischer Messungen nachgewiesen: 1. Wässrige Flüssigkeitseinschlüsse mit variablen CO2-Ge-halten — maximal 18 Gew.-% CO2 — sind bei Raumtemperatur zwei- oder dreiphasig. Ihre Homogenisierungstemperaturen liegen zwischen 269 °C und 357 °C. Die errechneten Salzgehalte repräsentieren 2.2 bis 7.8 Gew.-% NaCl-Äquivalent. Eine zusätzliche Methan-Komponente ist in jungen CO2-führenden Flüssigkeitseinschlüssen durch die mikrothermometrischen Daten (Tmclath 〉10.0 °C bei gleichzeitig TmCO2〈−56.6 °C) und Raman-spektroskopischen Analysen nachweisbar. 2. Wässrige Flüssigkeitseinschlüsse ohne feststellbare CO2-Gehalte sind zweiphasig. Ihre Salinitäten schwanken zwischen 0 und 11 Gew.-% NaCl-Äquivalent. Die Homogenisierungstemperaturen streuen zwischen 100 °C und 360 °C. Beide Typen von Flüssigkeitseinschlüssen sind zeitlich und genetisch der alpidischen Regionalmetamorphose zuordenbar. Sie ermöglichen keine Rückschlüsse auf die ursprüngliche Wolframabscheidung im Rahmen eines Geothermalsystems mit Explosionsphänomenen in präalpidischer (oberproterozoischer) Zeit. Aus den mikrothermometrischen und petrographischen Befunden war es jedoch möglich, den Entwicklungspfad der Fluide und die damit verbundene Remobilisation und Wiederablagerung der Erzmineralisation während der alpidischen retrograden Metamorphose abzuleiten.
Abstract Fluid inclusion measurements on quartz, scheelite, beryl, fluorite and calcite in the metamorphosed Felbertal scheelite deposit display two main types of fluid inclusions: 1. H2O-CO2 fluid inclusions are characterized by variable amounts of CO2 up to 18 wt.%. They show two or three phases at room temperature. The bulk homogenization temperatures for the inclusions range between +269 °C and +357 °C. The calculated salinities are between 2.2 and 7.8 wt.% NaCl equivalent. For the late CO2-bearing fluid inclusions a methane component is evident from microthermometrical data (Tmclath 〉10.0 °C combined with TmCO2〈−56.6 °C) and from Raman microprobe analyses. 2. Aqueous, two-phase fluid inclusions with salinities in the range between 0 and 11 wt.% NaCl equivalent. Their homogenization temperatures are scattered between 100 °C and 360 °C. Both types of fluid inclusions are of Alpine origin. They do not record the conditions of the original tungsten ore formation in pre-Alpine (Upper Proterozoic) time. However, it was possible to deduce a path for the fluid evolution and the combined ore redeposition during the retrograde Alpine metamorphism and tectonism from microthermometrical and petrographical studies.
Résumé Dans le gisement métamorphique de scheelite de Felbertal, les inclusions fluides, contenues dans le quartz, la scheelite, le béryl, la fluorine et la calcite, se répartissent en deux catégories: 1. Des inclusions aqueuses caractérisées par des teneurs en CO2, variables, pouvant atteindre 18% en poids. Elles comportent 2 à 3 phases à la température ordinaire. La température d'homogénisation va de 269 à 357 °C. Le calcul de la salinité donne entre 2,2 et 7,8% en poids d'équivalent NaCl. Dans les plus jeunes de ces inclusions à CO2, la présence de méthane est révélée par la microthermométrie (Tm clath〉10,0 °C avec Tm CO2〈−56,6 °C) et par la microsonde Raman. 2. Des inclusions aqueuses à 2 phases, dont la salinité est comprise entre 0 et 11% en poids d'équivalent NaCl. Leurs températures d'homogénisation se répartissent entre 100 et 360 °C. Les deux types d'inclusions sont d'origine alpine et ne correspondent donc pas aux conditions de la formation originelle du minerai, au Protérozoïque supérieur. Toutefois, les examens pétrographiques et microthermométriques ont permis de reconstituer le trajet d'évolution du fluide et les processus associés de remobilisation et reprécipitation du minerai au cours de la phase tectono-métamorphique rétrograde alpine.
1437-3262
14373262
Springer
shingle_catch_all_2 Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
Fluid inclusion studies of the Felbertal scheelite deposit
Zusammenfassung Zwei Haupttypen von Flüssigkeitseinschlüssen in Quarz, Scheelit, Beryll, Fluorit und Calcit aus der Scheelitlagerstätte Felbertal sind aufgrund mikrothermometrischer Messungen nachgewiesen: 1. Wässrige Flüssigkeitseinschlüsse mit variablen CO2-Ge-halten — maximal 18 Gew.-% CO2 — sind bei Raumtemperatur zwei- oder dreiphasig. Ihre Homogenisierungstemperaturen liegen zwischen 269 °C und 357 °C. Die errechneten Salzgehalte repräsentieren 2.2 bis 7.8 Gew.-% NaCl-Äquivalent. Eine zusätzliche Methan-Komponente ist in jungen CO2-führenden Flüssigkeitseinschlüssen durch die mikrothermometrischen Daten (Tmclath 〉10.0 °C bei gleichzeitig TmCO2〈−56.6 °C) und Raman-spektroskopischen Analysen nachweisbar. 2. Wässrige Flüssigkeitseinschlüsse ohne feststellbare CO2-Gehalte sind zweiphasig. Ihre Salinitäten schwanken zwischen 0 und 11 Gew.-% NaCl-Äquivalent. Die Homogenisierungstemperaturen streuen zwischen 100 °C und 360 °C. Beide Typen von Flüssigkeitseinschlüssen sind zeitlich und genetisch der alpidischen Regionalmetamorphose zuordenbar. Sie ermöglichen keine Rückschlüsse auf die ursprüngliche Wolframabscheidung im Rahmen eines Geothermalsystems mit Explosionsphänomenen in präalpidischer (oberproterozoischer) Zeit. Aus den mikrothermometrischen und petrographischen Befunden war es jedoch möglich, den Entwicklungspfad der Fluide und die damit verbundene Remobilisation und Wiederablagerung der Erzmineralisation während der alpidischen retrograden Metamorphose abzuleiten.
Abstract Fluid inclusion measurements on quartz, scheelite, beryl, fluorite and calcite in the metamorphosed Felbertal scheelite deposit display two main types of fluid inclusions: 1. H2O-CO2 fluid inclusions are characterized by variable amounts of CO2 up to 18 wt.%. They show two or three phases at room temperature. The bulk homogenization temperatures for the inclusions range between +269 °C and +357 °C. The calculated salinities are between 2.2 and 7.8 wt.% NaCl equivalent. For the late CO2-bearing fluid inclusions a methane component is evident from microthermometrical data (Tmclath 〉10.0 °C combined with TmCO2〈−56.6 °C) and from Raman microprobe analyses. 2. Aqueous, two-phase fluid inclusions with salinities in the range between 0 and 11 wt.% NaCl equivalent. Their homogenization temperatures are scattered between 100 °C and 360 °C. Both types of fluid inclusions are of Alpine origin. They do not record the conditions of the original tungsten ore formation in pre-Alpine (Upper Proterozoic) time. However, it was possible to deduce a path for the fluid evolution and the combined ore redeposition during the retrograde Alpine metamorphism and tectonism from microthermometrical and petrographical studies.
Résumé Dans le gisement métamorphique de scheelite de Felbertal, les inclusions fluides, contenues dans le quartz, la scheelite, le béryl, la fluorine et la calcite, se répartissent en deux catégories: 1. Des inclusions aqueuses caractérisées par des teneurs en CO2, variables, pouvant atteindre 18% en poids. Elles comportent 2 à 3 phases à la température ordinaire. La température d'homogénisation va de 269 à 357 °C. Le calcul de la salinité donne entre 2,2 et 7,8% en poids d'équivalent NaCl. Dans les plus jeunes de ces inclusions à CO2, la présence de méthane est révélée par la microthermométrie (Tm clath〉10,0 °C avec Tm CO2〈−56,6 °C) et par la microsonde Raman. 2. Des inclusions aqueuses à 2 phases, dont la salinité est comprise entre 0 et 11% en poids d'équivalent NaCl. Leurs températures d'homogénisation se répartissent entre 100 et 360 °C. Les deux types d'inclusions sont d'origine alpine et ne correspondent donc pas aux conditions de la formation originelle du minerai, au Protérozoïque supérieur. Toutefois, les examens pétrographiques et microthermométriques ont permis de reconstituer le trajet d'évolution du fluide et les processus associés de remobilisation et reprécipitation du minerai au cours de la phase tectono-métamorphique rétrograde alpine.
1437-3262
14373262
Springer
shingle_catch_all_3 Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
Fluid inclusion studies of the Felbertal scheelite deposit
Zusammenfassung Zwei Haupttypen von Flüssigkeitseinschlüssen in Quarz, Scheelit, Beryll, Fluorit und Calcit aus der Scheelitlagerstätte Felbertal sind aufgrund mikrothermometrischer Messungen nachgewiesen: 1. Wässrige Flüssigkeitseinschlüsse mit variablen CO2-Ge-halten — maximal 18 Gew.-% CO2 — sind bei Raumtemperatur zwei- oder dreiphasig. Ihre Homogenisierungstemperaturen liegen zwischen 269 °C und 357 °C. Die errechneten Salzgehalte repräsentieren 2.2 bis 7.8 Gew.-% NaCl-Äquivalent. Eine zusätzliche Methan-Komponente ist in jungen CO2-führenden Flüssigkeitseinschlüssen durch die mikrothermometrischen Daten (Tmclath 〉10.0 °C bei gleichzeitig TmCO2〈−56.6 °C) und Raman-spektroskopischen Analysen nachweisbar. 2. Wässrige Flüssigkeitseinschlüsse ohne feststellbare CO2-Gehalte sind zweiphasig. Ihre Salinitäten schwanken zwischen 0 und 11 Gew.-% NaCl-Äquivalent. Die Homogenisierungstemperaturen streuen zwischen 100 °C und 360 °C. Beide Typen von Flüssigkeitseinschlüssen sind zeitlich und genetisch der alpidischen Regionalmetamorphose zuordenbar. Sie ermöglichen keine Rückschlüsse auf die ursprüngliche Wolframabscheidung im Rahmen eines Geothermalsystems mit Explosionsphänomenen in präalpidischer (oberproterozoischer) Zeit. Aus den mikrothermometrischen und petrographischen Befunden war es jedoch möglich, den Entwicklungspfad der Fluide und die damit verbundene Remobilisation und Wiederablagerung der Erzmineralisation während der alpidischen retrograden Metamorphose abzuleiten.
Abstract Fluid inclusion measurements on quartz, scheelite, beryl, fluorite and calcite in the metamorphosed Felbertal scheelite deposit display two main types of fluid inclusions: 1. H2O-CO2 fluid inclusions are characterized by variable amounts of CO2 up to 18 wt.%. They show two or three phases at room temperature. The bulk homogenization temperatures for the inclusions range between +269 °C and +357 °C. The calculated salinities are between 2.2 and 7.8 wt.% NaCl equivalent. For the late CO2-bearing fluid inclusions a methane component is evident from microthermometrical data (Tmclath 〉10.0 °C combined with TmCO2〈−56.6 °C) and from Raman microprobe analyses. 2. Aqueous, two-phase fluid inclusions with salinities in the range between 0 and 11 wt.% NaCl equivalent. Their homogenization temperatures are scattered between 100 °C and 360 °C. Both types of fluid inclusions are of Alpine origin. They do not record the conditions of the original tungsten ore formation in pre-Alpine (Upper Proterozoic) time. However, it was possible to deduce a path for the fluid evolution and the combined ore redeposition during the retrograde Alpine metamorphism and tectonism from microthermometrical and petrographical studies.
Résumé Dans le gisement métamorphique de scheelite de Felbertal, les inclusions fluides, contenues dans le quartz, la scheelite, le béryl, la fluorine et la calcite, se répartissent en deux catégories: 1. Des inclusions aqueuses caractérisées par des teneurs en CO2, variables, pouvant atteindre 18% en poids. Elles comportent 2 à 3 phases à la température ordinaire. La température d'homogénisation va de 269 à 357 °C. Le calcul de la salinité donne entre 2,2 et 7,8% en poids d'équivalent NaCl. Dans les plus jeunes de ces inclusions à CO2, la présence de méthane est révélée par la microthermométrie (Tm clath〉10,0 °C avec Tm CO2〈−56,6 °C) et par la microsonde Raman. 2. Des inclusions aqueuses à 2 phases, dont la salinité est comprise entre 0 et 11% en poids d'équivalent NaCl. Leurs températures d'homogénisation se répartissent entre 100 et 360 °C. Les deux types d'inclusions sont d'origine alpine et ne correspondent donc pas aux conditions de la formation originelle du minerai, au Protérozoïque supérieur. Toutefois, les examens pétrographiques et microthermométriques ont permis de reconstituer le trajet d'évolution du fluide et les processus associés de remobilisation et reprécipitation du minerai au cours de la phase tectono-métamorphique rétrograde alpine.
1437-3262
14373262
Springer
shingle_catch_all_4 Schenk, P.
Höll, R.
Ivanova, G. F.
Naumov, V. B.
Kopneva, L. A.
Fluid inclusion studies of the Felbertal scheelite deposit
Zusammenfassung Zwei Haupttypen von Flüssigkeitseinschlüssen in Quarz, Scheelit, Beryll, Fluorit und Calcit aus der Scheelitlagerstätte Felbertal sind aufgrund mikrothermometrischer Messungen nachgewiesen: 1. Wässrige Flüssigkeitseinschlüsse mit variablen CO2-Ge-halten — maximal 18 Gew.-% CO2 — sind bei Raumtemperatur zwei- oder dreiphasig. Ihre Homogenisierungstemperaturen liegen zwischen 269 °C und 357 °C. Die errechneten Salzgehalte repräsentieren 2.2 bis 7.8 Gew.-% NaCl-Äquivalent. Eine zusätzliche Methan-Komponente ist in jungen CO2-führenden Flüssigkeitseinschlüssen durch die mikrothermometrischen Daten (Tmclath 〉10.0 °C bei gleichzeitig TmCO2〈−56.6 °C) und Raman-spektroskopischen Analysen nachweisbar. 2. Wässrige Flüssigkeitseinschlüsse ohne feststellbare CO2-Gehalte sind zweiphasig. Ihre Salinitäten schwanken zwischen 0 und 11 Gew.-% NaCl-Äquivalent. Die Homogenisierungstemperaturen streuen zwischen 100 °C und 360 °C. Beide Typen von Flüssigkeitseinschlüssen sind zeitlich und genetisch der alpidischen Regionalmetamorphose zuordenbar. Sie ermöglichen keine Rückschlüsse auf die ursprüngliche Wolframabscheidung im Rahmen eines Geothermalsystems mit Explosionsphänomenen in präalpidischer (oberproterozoischer) Zeit. Aus den mikrothermometrischen und petrographischen Befunden war es jedoch möglich, den Entwicklungspfad der Fluide und die damit verbundene Remobilisation und Wiederablagerung der Erzmineralisation während der alpidischen retrograden Metamorphose abzuleiten.
Abstract Fluid inclusion measurements on quartz, scheelite, beryl, fluorite and calcite in the metamorphosed Felbertal scheelite deposit display two main types of fluid inclusions: 1. H2O-CO2 fluid inclusions are characterized by variable amounts of CO2 up to 18 wt.%. They show two or three phases at room temperature. The bulk homogenization temperatures for the inclusions range between +269 °C and +357 °C. The calculated salinities are between 2.2 and 7.8 wt.% NaCl equivalent. For the late CO2-bearing fluid inclusions a methane component is evident from microthermometrical data (Tmclath 〉10.0 °C combined with TmCO2〈−56.6 °C) and from Raman microprobe analyses. 2. Aqueous, two-phase fluid inclusions with salinities in the range between 0 and 11 wt.% NaCl equivalent. Their homogenization temperatures are scattered between 100 °C and 360 °C. Both types of fluid inclusions are of Alpine origin. They do not record the conditions of the original tungsten ore formation in pre-Alpine (Upper Proterozoic) time. However, it was possible to deduce a path for the fluid evolution and the combined ore redeposition during the retrograde Alpine metamorphism and tectonism from microthermometrical and petrographical studies.
Résumé Dans le gisement métamorphique de scheelite de Felbertal, les inclusions fluides, contenues dans le quartz, la scheelite, le béryl, la fluorine et la calcite, se répartissent en deux catégories: 1. Des inclusions aqueuses caractérisées par des teneurs en CO2, variables, pouvant atteindre 18% en poids. Elles comportent 2 à 3 phases à la température ordinaire. La température d'homogénisation va de 269 à 357 °C. Le calcul de la salinité donne entre 2,2 et 7,8% en poids d'équivalent NaCl. Dans les plus jeunes de ces inclusions à CO2, la présence de méthane est révélée par la microthermométrie (Tm clath〉10,0 °C avec Tm CO2〈−56,6 °C) et par la microsonde Raman. 2. Des inclusions aqueuses à 2 phases, dont la salinité est comprise entre 0 et 11% en poids d'équivalent NaCl. Leurs températures d'homogénisation se répartissent entre 100 et 360 °C. Les deux types d'inclusions sont d'origine alpine et ne correspondent donc pas aux conditions de la formation originelle du minerai, au Protérozoïque supérieur. Toutefois, les examens pétrographiques et microthermométriques ont permis de reconstituer le trajet d'évolution du fluide et les processus associés de remobilisation et reprécipitation du minerai au cours de la phase tectono-métamorphique rétrograde alpine.
1437-3262
14373262
Springer
shingle_title_1 Fluid inclusion studies of the Felbertal scheelite deposit
shingle_title_2 Fluid inclusion studies of the Felbertal scheelite deposit
shingle_title_3 Fluid inclusion studies of the Felbertal scheelite deposit
shingle_title_4 Fluid inclusion studies of the Felbertal scheelite deposit
sigel_instance_filter dkfz
geomar
wilbert
ipn
albert
fhp
source_archive Springer Online Journal Archives 1860-2000
timestamp 2024-05-06T09:49:37.957Z
titel Fluid inclusion studies of the Felbertal scheelite deposit
titel_suche Fluid inclusion studies of the Felbertal scheelite deposit
toc Abstract Fluid inclusion measurements on quartz, scheelite, beryl, fluorite and calcite in the metamorphosed Felbertal scheelite deposit display two main types of fluid inclusions: 1. H2O-CO2 fluid inclusions are characterized by variable amounts of CO2 up to 18 wt.%. They show two or three phases at room temperature. The bulk homogenization temperatures for the inclusions range between +269 °C and +357 °C. The calculated salinities are between 2.2 and 7.8 wt.% NaCl equivalent. For the late CO2-bearing fluid inclusions a methane component is evident from microthermometrical data (Tmclath 〉10.0 °C combined with TmCO2〈−56.6 °C) and from Raman microprobe analyses. 2. Aqueous, two-phase fluid inclusions with salinities in the range between 0 and 11 wt.% NaCl equivalent. Their homogenization temperatures are scattered between 100 °C and 360 °C. Both types of fluid inclusions are of Alpine origin. They do not record the conditions of the original tungsten ore formation in pre-Alpine (Upper Proterozoic) time. However, it was possible to deduce a path for the fluid evolution and the combined ore redeposition during the retrograde Alpine metamorphism and tectonism from microthermometrical and petrographical studies.
topic TE-TZ
uid nat_lic_papers_NLM206068824