Multi-technique surface charaterization of oxide films on electropolished and anodically oxidized titanium - Lausmaa, J.; Kasemo, B.; Mattsson, H.; Odelius, H. (Elsevier)
The widespread use of pure Ti in biomedical applications and in basic biomaterials research has led to an increasing interest in the properties of its surface oxides, and how they can be modified. In this work, which was part of a broad surface characterization of oxide films on pure Ti and Ti-6A1-4V, the chemical composition of anodic oxide films formed on pure Ti during electropolishing and anodic oxidation was investigated using multi-technique surface analysis (XPS, AES/SAM, SIMS, RBS and NRA). XPS and AES Ti line shapes show that the oxide formed is mainly TiO"2, but the chemical composition can be modified by anion adsorption and/or incorporation when H"2SO"4 or H"3PO"4 electrolytes are used. Modification of the anodic oxide film composition also occurs during sterilization; increased Ca and H levels are observed by SIMS and NRA after autoclaving. AES and XPS depth profiles, together with RBS measurements, show that the oxide thickness depends linearly on the anodizing potential in the range 5-80 V, with a growth constant α"m~ 1.1 x 10^1^6 oxygen atoms/V... cm^2. The present results are compared with parallel studies of the composition and microstructure of thermal and anodic oxides on pure Ti and Ti-6A1-4V. The demonstrated systematic variation of oxide properties opens up the possibility to study the influence of specific surface properties on the biological response to Ti materials.
http://linkinghub.elsevier.com/retrieve/pii/0169-4332(90)90002-H
Keywords: U