Adhesive effect of high density polyethylene gels on polyethylene moldings
| ISSN: |
1435-1536
|
|---|---|
| Keywords: |
Adhesion ; gel ; decalin ; tetralin ; highdensitypolyethylene
|
| Source: |
Springer Online Journal Archives 1860-2000
|
| Topics: |
Chemistry and Pharmacology
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
|
| Notes: |
Abstract Adhesive effect of polyethylene moldings by use of high density polyethylene gels in organic solvents such as decalin, tetralin, ando-dichlorobenzene was investigated by shearing tests, electron microscope, and DSC measurements. All of the gels showed such a strong adhesive strength over 36 kg/cm2 that polyethylene plates of 3 mm in thickness gave rise to necking sufficient for practical use, when heated at 120 °C for 2 h. In particular, the gel in tetralin showed a strong adhesive strength when heated at 110 °C. It was found that adhesive strength increases with the heating temperature; the temperatures at which adhesive strength begins to increase differ depending on the type of polyethylene sample and solvent. It is apparent that polyethylene gels exhibit an adhesive effect when they are heated at higher temperatures than the gel melting temperatures, and that the closer the SP values of solvents used for the gelation are to the molded polyethylene, the stronger the adhesion of the polyethylene molding.
|
| Type of Medium: |
Electronic Resource
|
| URL: |